Features and Solutions
Focusing on what's important
A Component of the NA-T Street Torque Turbo Kit
This downpipe is used in the PHR NA-T Street Torque Turbo Kit. It is made for the 2JZ-GE only and should not be purchased if you have a 2JZ-GTE.
Turbo Fitment
This downpipe is made to fit up to Precision T4 4-Bolt S or H-Cover Turbos.
If you have a different turbo you'd like to use, contact us and order a the PHR 3" Downpipe, or PHR 4" Downpipe instead. They are made to order and can be fit to any turbo.
Construction
Hand build here at Powerhouse Racing each downpipe is tig welded from 3" Stainless Steel Mandrel Bends.
It features our aligning stainless turbine flange keeps the downpipe centered on the turbine flange. It also features a 3" stainless v-band flange for mating to the 3" midpipe.
It also includes an oxygen sensor weld bung for a wideband oxygen sensor.
Midpipe Compatibility
This downpipe will meet up to our 3" midpipes for the following vehicles:
- MKIV Supra or Lexus SC300
- Lexus GS300
- Lexus IS300
Specifications
| Vehicle Fitment | |
|---|---|
| Make | Toyota, Lexus |
| Model | Supra, SC300 (Soarer), IS300 (Altezza), GS300 (Aristo) |
| Chassis Code | A80, Z30, Z31, Z32, S160, S161, CE10, XE10 |
| Generation | MKIV (Mark 4), 2nd Gen |
| Trim | Naturally Aspirated (NA) |
| Fitment | |
|---|---|
| Engine | 2JZ-GE, Non VVT-i, 2JZ-GE, VVT-i |
| Product Specs | |
|---|---|
| Material | Stainless steel |
| Outer Diameter | 3.0 inches (76 mm) |
| Turbine Fitment | Precision T4 4-bolt Inet (S and H Cover) |
