PHR Dual High Performance SPAL Fan Kit

PHR 01010618.GB
https://www.powerhouseracing.com/web/image/product.template/17372/image_1920?unique=cd0e70b
(0 review)

759.83 759.83 USD 759.83

Buy with on orders over $50. See if you qualify

759.83

  • Finish
  • Make
  • Chassis Code
  • Generation
  • Engine
  • Engine
  • Engine
  • Engine
  • Material

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Features and Solutions

Focusing on what is important

Why

PHR is constantly striving to improve the Toyota Supra platform. And on a highly-modified Supra, heat is a devastating problem. With HUGE front mount intercoolers, high idle speeds, heat drenching turbos and high performance motors all saddled with a hot A/C condenser, maintaining reasonable engine temperature is a real problem. Upgraded radiators and fan setups are installed to help to address this problem, but sometimes they still come up short. Airflow must be improved to remove the heat from the motor.


What Is Included

The PHR Dual High Performance SPAL Fan Kit includes:

 1. Powerhouse Racing Fan Shroud

 2. Dual SPAL Fans

 3. Powerhouse Racing Wiring Harness

 4. All Necessary Hardware

Finish Options

• Raw

• Gloss Black Powder

• Matte Black Powder

• Wrinkle Black Powder

• Polished



Features

The PHR Dual High-Performance Spal Fan Kit comes with a PHR aluminum fan shroud, 2 twelve inch Spal High-Performance Fans, each pulling 1640CFM. Also included is the PHR Fan Control Relay Harness for fan control using simple on/off fan speed control at your desired temperatures.

Dimensions

Designed to fit the MKIV Supra Radiator, it will also work in a SC300 if you are using a MKIV radiator. You can find our upper mounts to do that here.

Installation

Installation is straight forward, however there will be a couple of modifications that need to be made. You will need to get a smaller battery or relocate your battery to the trunk. There is a pretty good chance you cold side piping might not clear.


Installation is simple using PHR's wiring harness and PHR's Fan Control Relay Harness. Simply wire to your aftermarket ecu for full control over the speed of your fans.

Specifications

Vehicle Fitment
Make Toyota
Chassis Code A80
Generation MKIV (Mark 4)
Fitment
Engine 2JZ-GTE, Non VVT-i, 2JZ-GTE, VVT-i, 2JZ-GE, Non VVT-i, 2JZ-GE, VVT-i
Product Specs
Material Aluminum
Variants
Finish Raw or Gloss black powder coat or Matte black powder coat or Wrinkle black powder coat or Polished