Features and solutions
Focusing on what's important
Design
These covers have had the oil cap removed. These are designed for engines running a drysump system. There are 4 beather ports on these valve covers. You will need block off plates for any ports you won't be using. Select the number of block off plates you need above.
Designed for street
cars all the way to full blown race cars. Multiple breather
options/locations are available for standard breather tanks to dry sump
engines running; pop-off valves, vacuum regulators and crankcase
pressure sensors. The advanced baffle system keeps oil inside the motor
and allows maximum breather capacity. These are the most advanced valve
covers on the planet.
Baffling
We took great care in design of the baffling in the PHR Billet Valve Covers. These are not just a simple aluminum plate. Our baffling design accounts for hard acceleration and the 2JZ's poor drainage at the back of the head, keeping oil inside the motor instead of spilling into a catch can. Air passages are designed to separate oil from air, allowing the air to escape while the oil remains.
Customization
The valve cover is the crowning piece of you build. Other than the coil cover, nothing is as important to making a beautiful 2JZ. Your build deserves it's crown.
Anodizing, and polishing options achieve the look you want. And we can customize the logo and block off plates with CNC or Laser engraving of car names, shop logos, team logos, and tributes. Make that motor pop! Build the show piece that will impress anyone who looks under your hood.
Features
- Uses OEM gaskets
- Advanced baffling
- Retains OEM or aftermarket coil cover
- Customizable
Sans Oil Cap
Because these valve covers and designed for dry sump equipped engines, we've excluded the oil cap boss.
Coil Covers and Coil Kits
Any OEM or aftermarket coil cover designed for the OEM valve covers will work on the PHR Billet Valve Covers. This is also true for IGN1A Coil Kits. If it fits OEM, it will fit these covers. No other valve covers offer the customization features of the PHR valve covers.
Breather Manifolds
Breather manifolds allow for attaching breather lines, pop-off valves, or regulators to the valve cover. These can be used on the rear ports for traditional breather tank setups or even run on the front ports for forward mounted breather tanks or vacuum pump setups. See the pictures below for how they are used.
To add breather manifolds, configure your valve covers above, then press "ADD TO CART" button above. You will be prompted to add them, as well as a coil cover and oil cap.
Tunerflix Install and Review
In this Supra Build we unbox, install, and review the PHR Billet Valve Covers for 2JZ - Non-VVT-i
Overview from Real Street Performance
These PHR valve covers really do give your engine that extra flare 🔥🔥
Specifications
| Variants | |
|---|---|
| Finish | Machined finish or Black Anodized or Polished |
| Valve Cover Selections | |
|---|---|
| Logo Plates Finish | Machined Finish or Black Anodized or Polished |
| Logo Plates Engraving | Blank or "Powerhouse Racing" or Custom |
| Number of Breather Port Bock-Off Plates | 1 Block-Off Plate or 2 Block-Off Plates or 3 Block-Off Plates or 4 Block-Off Plates or 0 Block-Off Plates |
| Breather Port Block-Off Plate Finish | Not Applicable or Machined Finish or Black Anodized or Polished |
| Breather Port Block-Off Plate Engraving | Not Applicable or Blank or "PHR" Logo or Custom |
