PHR Hubcentric Alignment Ring for Weld RTS Wheels on Supra (Rear)

PHR 01012402.R
(0 review)

52.00 52.0 USD 52.00


    This combination does not exist.

    Terms and Conditions
    30-day money-back guarantee
    Shipping: 2-3 Business Days

    PHR knows what's hot for the Toyota Supra. Weld Wheels are hot. Powerhouse Racing is the go to source for Weld on the Supra and we know what's required to make them fit. (Call PHR for info on your setup and what will be required).

    The Hubcentric Alignment Ring makes the hub carry the load of your car, not the wheels studs. These will help keep them from breaking by reducing the radial load put on by wheels with the bore larger than the hub.

    The Alignment Ring is sold EACH. You will need one for each wheel. The billet center cap shown in the picture is additional cost as well and is NOT included with the Alignment Ring unless you order it. Available below.

    The Weld center cap will NOT work with our spacer or our hubcentric ring, you will need the PHR Billet center cap if you want a center cap
    . Available below.

    Please specify if these will be on the front or rear. The rear alignment ring is taller to clear the axle nut.