PHR Hubcentric 1/2" Spacer for Weld Racing RTS Wheels on Supra (each)

PHR 01012401
https://www.powerhouseracing.com/web/image/product.template/15112/image_1920?unique=4c3d9eb
(0 review)

75.00 75.0 USD 75.00

Buy with on orders over $50. See if you qualify

75.00

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

PHR knows what's hot for the Toyota Supra. Weld Wheels are hot. Powerhouse Racing is the go to source for Weld on the Supra and we know what's required to make them fit. We came up with the Hubcentric 1/2" spacer to get the backspace required for certain RTS wheels. (Call PHR for info on your setup and what will be required).


The Hubcentric spacer makes the hub carry the load of your car, not the wheels studs. These will help keep them from breaking by reducing the radial load put on by cheap spacers.


The spacer is sold EACH. You will need one for each wheel. The billet center cap shown in the picture is additional cost as well and is NOT included with the spacer unless you order it.


The Weld center cap will not work with our spacer or our hubcentric ring, you will need the PHR Billet center cap if you want a center cap, Available below.