The PHR Short Stud and Nut Kit uses shorter studs than the factory twin turbo studs and the nuts are flanged with a smaller diameter flange. These are often used where clearance for manifold runners are very tight.
Each Kit Includes:
- (12) M10x1.25 studs
- (12) M10x1.25 nuts
PLEASE NOTE: We designed our Short Stud and Nut Kit to be used with our own 0.47" thick PHR Header Flange for 2JZ-GTE or header flanges that are similar in width. Each stud will protrude approximately 1" from the head once it is threaded in and approximately 13/16" of that will be threaded.