PHR Gift Cards now Available! 
Your shopping cart is currently empty.
PHR Rigid Ultralight Valve Covers for 2JZ (Non VVTi)
Regular Price: $1,439.00 (USD)
On Sale For: $1,151.20 (USD)
We have these Blemished Valve Covers available at a discounted cost, as you can see from the photos there is a small knick in the top of the intake side cover and 2 small knicks in the flange side of the intake cover. None of the damage will effect the ability to seal or performance of the valve cover itself.
The PHR Rigid Ultralight Valve Covers come from the needs of Duy Bui's "White Rice" Drag 240sx. Orignally needing a valve cover that was very light weight as well as rigidly mounted to be able to install a OEM cam sensor on the exhaust cam for data for the race team and consistency in tune-ups when switching from one motor to a back up motor. Hence the name was born: The Rigid Ultralight Billet Valve Cover.
We decided to offer these amazing valve covers to the rest of the 2JZ community, but with or without the cam sensor boss, which is very rarely needed except for rare curcumstances for race teams like White Rice, and Dirty Taco. (See pictures of the cars and note below).
Powerhouse Racing Billet Valve Covers are precision machined from solid 6061 billet and retain OEM fitment. Weight comes in at only 5 lbs. 14 oz. compared to the stock valve covers at 7 lbs 9 oz.
They use o-ring cord stock for sealing, all the way around the cover, including over the front cam cap with very precise tolerances. This allows race teams to carry some cord stock in their trailers to replace is the valve covers ever need to come off with very minimal expense over the factory valve cover gaskets. The cord stock is fully compressed into the valve cover allowing the valve cover to come into full contact with the mating surface to act as a further heat sink as well as making a solid precise mount of the valve cover. A dab of gasket maker or "FIPG" is all that is needed in the corners of the front main cap to get a great seal and that very small amount of sealant makes cleanup simple.
Designed for race cars, the rear ports are LARGE for maximum breathing. Multiple breather options are available for standard breather tanks to dry sump engines running; pop-off valves, vacuum regulators and crankcase pressure sensors. These valve covers have very minimal baffling to focus on breathing. For those needing an oil cap, one of the rear ports can be used for an oil cap while the second port is large enough to allow for lots of air to still vent to a catch can.
Features Include;
- Removable baffles for easy cleaning or running without
- Rear sensor port for measuring crank case pressure
- O-ring cord seal
- Only 5 lbs 14oz combined weight
NOTE: Will work with 2JZ-GE, Non-VVT-i Motors as well, but must convert to front facing intake manifold.
Valve Cover Options:
These valve covers sport a single -20 ORB opening on each one. You are able to select your options for fittings. -12AN, -16 AN, -20 AN, -20 ORB oil cap, or -20 ORB plug each sold separately.
Also available is the PHR quick release coil cover for those running coils that can fit between the valve covers. This coil cover uses simple quick release buttons to allow for removal in just seconds.