PHR Oil Temp/Crank Case Pressure Adapter Kit for 2JZ (or low oil level switch block-off plate)

Adapts OEM oil level location to accept Oil Temp Probe and 1/8" NPT plug or Crank Case Pressure Sensor

Powerhouse Racing is proud to offer a multi-functional solution for adding an oil temperature sensor to your 2JZ oil pan. We believe this is the best location to give you the most reliable data when monitoring your oil temperature!

The CNC machined aluminum bracket includes two ports. The first port will be fitted with a temperature probe and the additional port will be optioned to allow you to either plug the additional port or add a AEM 2 Bar sensor to monitor crankcase pressure from the same location. 

Compatible with both front sump and rear sump 2JZ oil pans.

WARNING: THIS REQUIRES THE REMOVAL OF THE OEM OIL LEVEL SENSOR. We highly recommend adding an oil pressure sensor to monitor your engine health. We have multiple solutions for this.

The PHR Crank Case Pressure/Oil Temp Adapter Kit includes:

  • CNC Machined Aluminum Plate w/ o-ring
  • (4) M6 mounting bolts
  • Temperature Probe and DTM Connector
  • 1/8" NPT Plug or AEM 2 Bar sensor

Note: Can be used as a block-off plate if you exclude the sensors

Front sump fitment: This adapter works fine on front sump motors. It is close to the ac compressor but fits just fine.

PHR 01011081
Making selections in the following sections may change the final product price.
PHR Temp Sensor is the only sensor designed to work with this kit. Other oil temperature sensors are too short and will not submerge in the oil to get an accurate reading.
To be used as a block off plate or for crank case pressure only


  • No Sensor (include 1/8" NPT plug)
  • Temp Sensor Included (PHR 01010767)
$62.10 (USD)
$128.70 (USD)