PHR High-Flow Fuel Rail Kit for 1JZ-GTE (non-VVT-i)

PHR High-Flow Fuel Rail Kit for 1JZ-GTE (non-VVT-i)

The Powerhouse Racing High-Flow Fuel Rail for the 1JZ-GTE non-VVT-i engine features a 17.5mm (-8AN) internal diameter to allow for the most flow possible.

The PHR Fuel Rail Kit Includes:
High-flow fuel rail
Mounting brackets
Fuel Injector Bosses
One -8AN side inlet fitting,
One -6AN side outlet fitting,
One -6ORB plug for the center port.

For different inlets or outlets, you can add fittings below.

Anodized Black finish protects against exotic fuels and alcohols.

Must be used with 14mm injector top and 14mm injector bottom, 60mm tall.

Requires OEM intake manifold

PHR 01011244
Making selections in the following sections may change the final product price.
If you have a inlet line size other than -8AN, add a fitting to adapt to it.
Rail already comes with a -8AN inlet fitting
If you have an outlet line size other than -6AN, add a fitting to adapt to it.
Rail already comes with a -6AN outlet fitting
Rail will come with a -6ORB plug in this position. If you are doing a center exit setup, add a fitting to adapt to your center exit line. -6 size line is the only size that will fit here because there is limited room between the intake manifold runners.
Rail already comes with a -6ORB plug

Summary

  • No Additional Inlet fitting
  • No additional outlet fitting
  • No additional center port fitting
$299.00 (USD)
$299.00 (USD)
Loading...