Checkout
View Cart (0)
PHR Products → PHR Fuel Systems and Components → PHR Fuel Rail Kits → PHR Fuel Rail for 2JZGE Early Model Intakes, Non-Turbo

PHR Fuel Rail for 2JZGE Early Model Intakes, Non-Turbo

The PHR high flow fuel for 2JZGE early model intakes (non-turbo) features a 17.5mm (-8AN) internal diameter aluminum rail for the most flow possible! Capable of fuel flow to feed over 2000 Horsepower.

This fuel rail fits earlier model intakes that do not have the fuel vapor tube (1996 and older).

The PHR Fuel Rail Kit Includes:
High-flow fuel rail
Mounting brackets
Fuel Injector Bosses
One -8AN side inlet fitting,
One -6AN side outlet fitting,
One -6ORB plug for the center port.

For different inlets or outlets, you can add fittings below.

Comes in a Black Anodized Finish. Our anodizing offers protection against exotic fuels and alcohols.

Must be used with 14mm injector top and 14mm injector bottom, 60mm tall. We recommend Injector Dynamics injectors with our fuel rails, but there are many injectors that will work. (this rail is made to fit most domestic style injectors)

Will work with factory intake manifold or Virtual Works intake manifold. Will not work with Hypertune Intake Manifolds.


PHR 01011205.NA
Making selections in the following sections may change the final product price.
If you have a inlet line size other than -8AN, add a fitting to adapt to it.
Rail already comes with a -8AN inlet fitting
If you have an outlet line size other than -6AN, add a fitting to adapt to it.
Rail already comes with a -6AN outlet fitting
Rail will come with a -6ORB plug in this position. If you are doing a center exit setup, add a fitting to adapt to your center exit line. -6 size line is the only size that will fit here because there is limited room between the intake manifold runners.
Rail already comes with a -6ORB plug

Summary

  • No Additional Inlet fitting
  • No additional outlet fitting
  • No additional center port fitting
$299.00 (USD)
$299.00 (USD)
  • Payment Methods
All Products Purchased from Powerhouse Racing are for motorsport purposes only and must never be installed on a vehicle driven on a public street or highway unless permitted by specific regulatory exemption. Installer/user located outside of the United States should act in accordance with their local laws and regulations.

It is the responsibility of the installer and/or user of these products to ensure that they be used in compliance with all applicable laws and regulations, and these products must not be purchased if the intent is to use them in an unlawful manner.

© 2023. All Rights Reserved.
Loading...