PHR Triple Walbro 485/525 Fuel Pump Hanger for SC300 - E85

PHR INTRODUCES THE WORLDS FIRST AND ONLY TRIPLE WALBRO 450 (aka 485) FUEL PUMP HANGER FOR LEXUS SC300!

With a Flow Rating of over 800 lph or 267 Gallons per hour at 90psi, this pump setup is good for over 1900hp on Race Gas, 1400hp on E85!!!

Powerhouse Racing is proud to offer a legitimate solution for a hanger for the SC300, SC400, Soarer Platform. Use it to install 1, 2 or 3 fuel pumps. For too long SC300 owners have had to come up with compromises in fuel systems. PHR is the first to tackle this problem head on with our dual bosch hanger and now further that trend with the Triple Walbro 450 fuel pump hanger.

Compatible with Walbro 450 or Walbro 525 pumps

This triple pump hanger features:
CNC machined 6061 aluminum construction
Exact fit to the OEM tank
All applicable hardware
Proprietary sealed circular connectors potted with E85-safe epoxy
All PHR Hangers use Mil-Spec M22759/16 Tefzel wire.
Pumps can be triggered individually in staged sequence (and should be).
Anodized black! This will ensure our hangers can be used permanently in alcohol / methanol / E85 fuels with no concerns of long term corrosion.
Teflon Hoses, fully compatible with any fuel type.

The hanger will come standard with a single -8AN outlet, and a -6AN return fitting. There are two outlet ports for those who are wanting to run dual feed lines, one of which will come with a plug in it. You can add additional fittings below for running different line configurations and sizes.

 

PHR 03081211
Making selections in the following sections may change the final product price.
Hanger will come with a -8AN outlet in one port, and a -8ORB plug in the other outlet port. You can add an additional fitting to adapt to different size feed lines.
Hanger will come with a -8AN outlet in port #1
Hanger will come with a -8AN outlet in one port, and a -8ORB plug in the other outlet port. You can add an additional fitting for running dual lines.
Hanger will come with a -8ORB plug outlet in port #2
Hanger will come with a -6AN return fitting. You can add a -8AN fitting to adapt to a -8AN return line.
Hanger will come with a -6AN return fitting.
For rubber hose
For rubber hose
The PHR Wiring Harness for Dual or Triple Fuel Pumps makes installation seamless. No sourcing hardware, spending time analyzing relay pinouts or any mistakes. Simply run your power to the battery, connect your ground, connect your trigger and run the outputs to your fuel pumps.

Summary

  • No additional outlet fittings for port #1
  • No additional outlet fittings for port #2
  • No addtional return fitting
  • No Fuel Pump
  • No Install Kits
  • No Harness
$562.00 (USD)
$562.00 (USD)
Loading...