PHR Ethanol (E85) Based Fuel System for SC300

The PHR Ethanol/E85 Based Fuel Systems for the Lexus SC300 are the most complete solution for upgrading your fuel system to achieve your power goals. This system is based on using Ethanol as your fuel type and the components are based on that. The system can be customized and upgraded to the components you want and horsepower capabilities you need. This system is good from 500 to over 1100hp on E85. All lines are preassembled to the length needed for a quick and painless installation.

The base kit comes with:

Injector Dynamics ID1000 Injectors,
PHR Black Anodized Fuel Rail,
Teflon Braided Stainless -6AN Dual Feed and Return Fuel Lines,
2x 6AN Goodridge fuel filters,
Aeromotive FPR,
PHR Regulator Hanger,
Fuel Pressure Gauge,
PHR Triple Walbro Fuel Pump Hanger
2x Walbro 485 Fuel Pumps (TWO PUMPS)
2x PHR Walbro 485 Install Kits
PHR Wiring Harness for Dual or Triple Pump Setups,
And is fully upgradable using the options below.

USE THE OPTIONS BELOW TO BUILD THE SYSTEM TO FIT YOUR NEEDS

ABOUT PHR FUEL SYSTEMS

The Powerhouse Racing Fuel System is the highest-quality and most complete fuel system available for your SC300 in the aftermarket, period. The goal at PHR has always been to make the upgrade process as simple and smooth as possible, while using the highest quality components available. Our fuel system upgrades are pre-assembled in the box, and are ready to install.

Part # PHR 03081210

 

Making selections in the following sections may change the final product price.
(Must Select Single Weldon Filter Below)
(Must Select Single Weldon Filter Below)
(Must Select Single Weldon Filter Below)
(Must Select Single Weldon Filter Below)
(must select Single -8 or -10 Feed Line above)
(must select Dual -6 or -8 Feed Line above)
(must select Single -8 or -10 Feed Line above)
(must select Dual -6 or -8 Feed Line above)
(requires walbro 485 pumps, select below)
(requires bosch 044 fuel pumps, select below)
(Requires PHR Triple Walbro Hanger)
(Requires PHR Triple Walbro Hanger)
(Requires PHR Dual Bosch Hanger)
(Requires PHR Triple Walbro Hanger)
(Requires PHR Triple Walbro Hanger)
(recommended if doing dual Walbro 485's or dual Bosch 044)
(recommended if doing Triple Walbro 485's)
(Set of 5)

Summary

  • Factory Intake Manifold
  • Black Hose Ends with Stainless Line
  • Dual 6AN Feed to Single Rail w/ 6AN Return
  • For 2JZ-GTE (Turbo, both VVT-i and non VVT-i)
  • Single Goodridge Fuel Filter
  • ID1050X
  • ID1050X
  • Aeromotive Fuel Pressure Regulator
  • Triple Walbro Fuel Pump Hanger
  • Dual Walbro 485 Fuel Pumps
  • No Wiring Harness
  • No Fuel Line Hangers
  • No Flex Fuel
$2,967.05 (USD)
$3,708.05 (USD)
Loading...