Fuel Kits & Components for 1989-94 Skyline R32

CM in-line fuel filters are designed to be light in weight, and simple to install and plumb. These filters are the best available, every fuel system should be equipped with one. The housings are 2-3/4'' diameter with a red anodized finish and have easily removable clear anodized end caps for element replacement.

The -6AN Inline Fuel Filter is the Identical Filter included in all of our Fuel Systems. This makes a great filter for any Fuel application using AN lines and fittings. Filter is approximately 4'' long and has male adapters for both ends to connect.

As performance levels increase because of greater airflow efficiency, or higher boost levels, fuel delivery plays a crucial role in developing maximum horsepower, and maintaining a proper air to fuel ratio. HKS now brings to you External Fuel Pumps for the R32 Skyline, HKS's external fuel pumps are high performance units that work in series with your factory pump to offer sufficient fuel for high boost applications where the factory injector pulse duration is increased substantially, or where additional or larger injectors are utilized.

HKS Fuel Rail Upgrade kits are high-performance fuel delivery units that are designed to properly supply the additional fuel needed for high boost/performance applications. HKS Fuel Rail Upgrade kits are direct bolt-on replacements of factory fuel rails, and allow for larger top-feed injectors to be added. HKS Fuel Rails are machined out of aluminum and anodized HKS signature purple for durability and visual appeal.

Note: Please choose desired inner diameter rail size below.

As boost pressure is increased on forced induction vehicles, the amount of boost that can ultimately be used is limited by the constraints of the engine and injector capacity. When OEM injectors reach their maximum capacity, they can no longer flow any additional fuel for higher boost levels; Therefore larger primary injectors can be installed in the factory location and be controlled by an injector upgrade specific program of the VPC, PFC F-CON, or the F-CON S system. HKS injectors range in size from 188cc to 1000cc and are offered in both hose-end types and OE top feed fuel rail types. Hose-end injectors are typically used with the HKS AIC installation kits for an intake-stream installation. Rail type injectors are used on the factory fuel rails or on vehicle specific, HKS fuel rail upgrade kits or AIC Pipe kits. HKS injector harnesses and other miscellaneous injector hardware and fittings are also available for custom applications.

Injector Dynamics has now released the complete ID lineup for the R35 GTR. With 725cc, 1000cc, and 2200cc/min options, there's a perfect fit for any application. All of the injectors are high impedance and offered with an optional plug and play wiring harness, making them a true 100% drop in application. With the most linear flow and best atomization on the market, long gone are the days of sacrificing idle and driveability just to get enough fuel for your modified engine.

We recently installed the ID1000's in the T1 GTR. With an AccessPORT flash from Tim Bailey at COBB/Surgeline, the car runs like it did from the factory, just with 120 more hp and 140 more lb/ft of torque! Doing ID1000's also opens up the ability to run E85 on the GTR. Tim has found about 30whp gains just from going to E85 from 93 octane.

Powerhouse Racing has evolved around quality and perfection and with the new Skyline community we bring the High Flow Fuel Rail Kits that come in both Polished and Black Chrome. These rails are always in stock and have key features that leave other companies behind:

• Injector bosses which replace the rubber orings to but a tight fit on the o-ring on the injector.
• Black Chrome or Polished.
• 14mm Domestic Style Injector Size or 11mm Denso Style Injector Size.
• Mounting Brackets for either RB25DET or RB26DETT

NOTE - All Fuel Rail Kits come with a full install kit, nuts, bolts, orings, fittings and mounting brackets to make this a breeze of an install!

Powerhouse Racing has evolved around quality and perfection and with the new Skyline community we bring the High Flow Fuel Rail Kits that come in both Polished and Black Chrome. These rails are always in stock and have key features that leave other companies behind:

• Injector bosses which replace the rubber orings to but a tight fit on the o-ring on the injector.
• Black Chrome or Polished.
• 14mm Domestic Style Injector Size or 11mm Denso Style Injector Size.
• Mounting Brackets for either RB25DET or RB26DETT

NOTE - All Fuel Rail Kits come with a full install kit, nuts, bolts, orings, fittings and mounting brackets to make this a breeze of an install!

Note: Please choose Fitting size below for proper connection to your in line: -10AN, -8AN, or -6AN.

This anti-magnetic wrap is included in all PHR fuel systems. The purpose is to eliminate magnetic interference between dual pumps running while in contact with each other as typical in dual-pump fuel systems. It also provides some vibration resistance while pumps are in contact with each other. This proprietary material is completely chemical-proof and can survive submerged in gasoline for years. Its the ONLY material that can survive inside your fuel tank and not deteriorate over time. Standard size is 3" x 6", other sizes available as required.

Most companies supply injector wire clips that lock in place once installed. While this may be secure, it makes servicing of the fuel system an impossible task. To change this, we offer our Quick Release Injector wire clips which feature a spring loaded release clip. Injectors can be disconnected quickly using one hand, making for ease of service. Included in all PHR fuel system upgrades.

A High-capacity power harness to yield the best performance of your SARD fuel pump. This harness kit supplies battery current directly to reduce power loss for enhancing he efficiency of the fuel pump.

SARD's In-Tank fuel pumps are high performance units that are designed to offer stable fuel pressure, and less drop downs of discharge rate even in the high-pressure range. SARD fuel pumps are high-capacity and compact In-Tank fuel pumps, with bolt-on installation to Toyota pump brackets. For other Japanese vehicles, use supplied couplerterminals when installing (Except for 280L).

Note:Please select from 5 types of discharge rate to match your vehicle and specifications.